Leaf Cutout Driftwood Floor Lamp with Inner Glow

The Leaf Is the Absence of Wood

A vase-shaped column of solid driftwood stands in a gallery corner, swelling to a wide belly before tapering to a narrow neck beneath the linen shade. A large leaf pattern is carved through the front face, with a central midrib and branching veins cut clean through the wood wall. Warm amber light pours through every opening, projecting a leaf-shaped constellation of golden light across the floor. The leaf is not painted or applied. It is the absence of wood, and the light that fills that absence.

Carved by Hand. Every Cut.

This driftwood floor lamp is carved entirely by hand by our artisans in Vietnam. No CNC. No laser cutting. No factory molds. The artisan selects a single driftwood blank where the natural grain flows in the same direction as the branching veins, so wood fibers run continuously through each bridge rather than crossing at a weak angle. Finding that grain match, then carving ten precise openings through a curved wall without breaking a single vein bridge, is why each piece takes weeks to complete.

Five pairs of lateral veins branch outward from a thick central midrib, curving slightly upward toward the leaf outline. The spaces between veins are cut clean through the wood wall, creating ten distinct openings. The veins remain as solid wood bridges holding the structure together. Every cut negotiated with the grain. That is something no machine can replicate.

One Block. One Lamp. No Two Alike.

The entire body is carved from one solid block of driftwood. No glued joints. No composite panels. No MDF core with a veneer face. The outer surface carries dark walnut-brown tones with flowing cathedral grain from years of natural aging. The inner surfaces of the leaf cutout show lighter honey and golden caramel tones where the carving exposed protected heartwood.

Because every driftwood blank has different grain, different color balance, and different knot placement, no two finished lamps look the same. The leaf pattern on yours will not exist on any other piece.

Dark Frame, Bright Leaf

When the LED is on, the inner heartwood surfaces glow warm and bright. The leaf reads as a bright botanical silhouette framed by dark aged wood. When the light is off, it reads as a sculptural void with visible depth and shadow in every opening.

Two Light Layers

A warm LED strip lines the hollow core behind the leaf cutout. The tapered linen shade on top provides soft room light from above. The leaf cutout provides mid-height accent and pattern light from within. An inline dimmer controls both together. Full brightness for ambient light. Low dim for a sculptural accent piece that projects a warm leaf pattern across the floor.

Care and Placement

• Dry indoor use only. A climate-controlled gallery or living room is ideal.
• Dust the vein bridges with a soft brush or compressed air. Wipe the outer surface with a dry cloth.

Fully Customizable

Need a different leaf pattern, taller body, alternative shade, or a matched pair? Every piece is handcrafted by our artisans and fully customizable. Contact our support team with your requirements.

Furniture Placement

• Position your furniture away from direct sunlight, or use blinds or curtains to reduce sun exposure.
• Always set your furniture on a level surface to preserve its balance and structure.

Cleaning & Upkeep

• Regularly wipe down your furniture with a soft, dry, or slightly damp cloth.
• Avoid using harsh chemicals like bleach or ammonia, as these can ruin the finish and damage the wood.

Weight Capacity & Use

• Respect the recommended weight limit for each piece to ensure its durability.
• When moving furniture, lift it instead of dragging or pushing to prevent surface scratches or joint damage.

Preventing Mold & Mildew

• Quickly wipe up any spills to stop moisture from penetrating the wood.
• In areas with high humidity, use a dehumidifier to maintain an ideal moisture balance.

Shipping Cost

We offer free shipping on all orders.

Return Policy

You can return your item within 30 days of the delivery date.

Products must be damaged or broken, in their original condition, and have all tags still attached.

Please Note: Returns are only accepted for items with manufacturer defects or those damaged during shipping.

Step 1: Share Your Specs

Tell us your dimensions, design ideas, materials, and color preferences.

Step 2: We Craft Your Piece

Our team starts production. Typical build time: 7–10 business days (varies by complexity).

Step 3: First Look

We send photos and videos for your initial review.

Step 4: Fine-Tuning

We make adjustments based on your feedback to match your vision.

Step 5: Final Approval

You get final photos/videos to confirm everything is perfect.

Step 6: Pack & Ship

We pack securely and ship your order. Typical delivery: 3–7 business days (depends on destination).